CTX 120 Hypocal quick chlorine for swimming pool, granulated, 5kg

USAGE INSTRUCTIONS

Adjust the pH of the water before adding chlorine to make it more effective.

Insert the required amount of product into the skimmers and then switch on the filter equipment; the product will dissolve as it moves through the skimmers.

It is also feasible to evenly distribute the product around the surface of the swimming pool, ideally in the evening and when there are no swimmers in the pool. The residual free chlorine concentration must be between 0.5 and 2 mg/l. This value is simply determined with an analyzer chlorine and pH case. This control must be performed at least twice every day.

This product should not come into direct contact with swimming pools that have liner, polyester, or vinyl, or with painted swimming pools since it may cause discoloration.

DOSAGE

Initial Treatment: For each m3 of water, add 15 g of product. After 2 hours, use ctx 10 pH Minus solid or ctx 20 pH Plus solid to adjust the pH of the water to 7,2-7,6.

When you observe a lack of transparency in the water, repeat the initial treatment.

Maintenance treatment:

Once the pH of the water has been stabilised, introduce 1-2g of product per m3 of water daily.

These are the recommended doses, which can be adjusted based on the peculiarities of each swimming pool, climate, and so on.