Zodiac MX6 hydraulic pool cleaner, ¾ hp, up to 10 m

Zodiac MX6 hydraulic pool cleaner, ¾ hp, up to 10 m

The hydraulic cleaners are an additional option for pool cleaning. Unlike the electric cleaners, which operate independently and autonomously, this cleaner requires a connection to the pool filtration system. They are plugged into the cleaners' socket or skimmer and run on the pump's power. Meanwhile, the pool's return is connected to pressure pool cleaners. Filter bags are typically included to hold solid pollutants, and they typically require for the installation of an additional pump.

Although these cleaners are less expensive to buy than the automatic machines, they offer fewer operational savings. On the other hand, since the dirt enters the pre-filter and then the filter, it doesn't require monitoring.

Zodiac MX6 hydraulic pool cleaner has a strong turbine, one auxiliary propeller, and a pre-programmed X-drive navigation system. It includes a flow regulator valve, which controls excess flow through the cleaner for the greatest efficiency and endurance.

Product specifications:

• Minimum filter pump power: ¾ hp
• Filtration capacity: pool filtration circuit
• Cleaning width: 30 cm
• Hose length: 10 m
• Inlet suction 25 cm
• Displacement rate: 8 m/min
• Surface to clean: floor and walls
• Cleaner size: 31 x 19 x 22 cm
• Cleaner weight: 2.5 Kg
• Steering: Random
• Power Supply: Filtration group

Pool properties for device to work:

• Water temperature: between 15 °C and 35 °C
• pH: between 6.8 and 7.6
• Chlorine: <3 mg/l

Package inclusion:

• twist lock hoses, in-ground valve cuff, 45° elbow extended, 45° elbow, flow regulator valve, flow keeper valve

Optional accessories:

• 6 section of 1 m twist lock hoses (W78055)
• Cyclonic leaf catcher (W37110)