CTX 500 Algastop is intended to prevent algae growth, which can turn your pool water green, murky, and unpleasant. Algaecide is an important part of pool maintenance since it keeps the chemical balance of your pool water balanced. It works best with the extra attribute of not foaming because it has no effect when introduced into pool water. It removes all varieties of algae, including black algae. Effective, fast-acting quaternary ammonium compound having significant algicidal characteristics for preventing and eliminating algae.
Removes all types of algae and is recommended even for pools with polyester liners because to its non-staining properties. This solution is capable of removing green algae, a type of algae that likes to remain suspended in the water, giving it a green colour, and also adheres to the entire surface of the vessel. Capable of eliminating brown, yellow, and red algae that attach to the walls and become entrenched in difficult-to-reach locations. The yellow-brown algae frequently covers the whole surface of the pool walls and gives the pool water a yellowish tint. It has the potential to eradicate black algae, which appears as little isolated areas and is frequently positioned in strategic and often difficult-to-access locations. Traditional treatments for its eradication are typically futile.
Directions:
Pour the required amount of product into a container with water and spread the solution evenly around the pool's surface. It is wonderful around sunset and when there are no swimmers. Pool glass disinfection: Before refilling the pool, it is advised to impregnate the walls and bottom with a product solution (1 lt. of the product in 10 lts. of water), forming an action disinfecting protective film. Disinfection of the pool environment: Pool environment surfaces can become slippery and serve as a vehicle for disease transmission. To avoid these problems, we recommend using a sprayer to apply a product solution (5 litres of the product in 10 litres of water) everyday.
After one hour, thoroughly rinse these surfaces with clean water.
DOSAGE
To begin, add 2 litres of product per 100 m3 of water.
When the water does not appear translucent, repeat the initial treatment.
Maintenance treatment: Once a week, add 0.5L for every 100m3 of water.
These are the recommended doses, which can be adjusted based on the peculiarities of each swimming pool, climate, and so on.